Central Texas Brisket on the YS640

We’ve said it before and we’ll say it again: Yoder owners are THE BEST. Hands-down.

Need proof? Check out our Official Forum, a place where current and future owners come together to share tips, tricks, and mouthwatering photos from their barbecue arsenals. Central Texas brisket has been a hot topic for a while, due in no small part to that Beard Award-winning fella down in Austin and the recent shortage of what used to be a cheap and abundant cut of beef. The story and photos below were posted by forum user Scott, who was on a mission to replicate Texan brisket bark in Western Michigan using his YS640. Looks like he nailed it!

Central Texas Style Brisket on the Yoder Smokers YS640 pellet grill

Central Texas Barbecue is my favorite style, bar none, and it’s what I always go for with my brisket. I’ve smoked quite a few briskets on my YS640 since purchasing, but this one ended up being the best so far… a success on every level. Well, almost every level. I wrote down some notes and took photos along the way and figured maybe this might be of some interest to my fellow pitmasters.

The Meat
A 15 lb Choice packer. I live in West Michigan and packers have alway been an expensive proposition – around $8.50lb; often for just select grade!! However, in a most bizarre and awesome turn of events, this summer nearly every butcher shop in the area has started carrying packers of choice grade at a much more reasonable $4.50/lb. Still more than what you’d pay in Texas to be sure, but much more affordable for us West Michigan Yankees. This new found brisket bonanza actually corresponds with something of a barbecue renaissance in this area – with no less than 3 barbecue joints opening up in downtown Grand Rapids just this summer! Even more shocking is that they are all offering some pretty serious brisket, and sell all meat by the pound. NICE.
Packer Brisket for the Yoder Smokers YS640

The Trim
I lost probably about 3lb or so of inedible fat and browned meat edges. This was a really great cut, with nice marbling and a deckle that wasn’t out of control, haha. I also trimmed off every bit of silver skin on the back side. I hate the stuff with a passion and getting all of it off with ensure that the rub sticks like glue when you go to pull and then slice.
Trimming Brisket for the Yoder Smokers YS640

The Rub
Nothing but Texas Rub, baby! That is to say, kosher salt and coarse black pepper. Absolutely, positively nothing else. No sugar, no cayenne, no olive oil before the rub, no mustard bath before the rub…nothing. It’s taken me awhile to finally adobt the purity of what Franklin Barbecue, Blacks, Cranky Franks, and other classic Central Texas barbecue joints use and I will never go back. Ever. It’s not that I’m against a savory blend of other spices for the rub. Those can be really good. It’s just that Aaron Franklin and others are right on the money when they stress, like gospel, that salt and pepper is all the meat needs. If you’ve never tried it; if you have doubts….give it a go just once. Don’t do mustard or any other base. A nice choice grade of meat with good marbling will not need it. You will be amazed at the purity and flavor.
Simple Brisket Rub for the Yoder Smokers YS640

The Cook
(Yoder set to 250° for the entire cook Damper set to slightly, maybe an inch or so, to the left of dead center so that I’d get a bit more heat on the point – which is always positioned closest to the heat grate). At the very start of my Yoder experience I took everything out before seasoning, set the damper so that it’s exactly dead center in the pit, then marked that location with a sharpie pen on the stainless rack above the damper handle. I can then see instantly where I need to set my damper to start for an even cook, or adjust accordingly depending on my needs

I put a small stainless steel bowl full of water on the top rack. While the bottom rack is best, this still helps keep the meat moist.

At no point did I mist. Misting is the enemy of great bark. Unless you’ve got a massive propane tank cooker that can hold 4 or 5 briskets, misting a brisket on a Yoder is completely unnecessary and will only serve to dampen your bark. I’m not saying don’t do it because for a lot of pitmasters the misting is an important part of the process and taste they are after. If you desire Central Texas style like I do, then don’t mist.

FAT SIDE UP. No self respecting Texan – or a Yankee like me who fancies himself a self respecting Texan – is going to smoke a brisket fat side down.

I decided to mix it up a bit for this cook. Normally I cook for 7 hours and then wrap in butcher paper for another 3 or so until I hit an internal at the flat of 210° and 200° for the point. Then I’ll rest for anywhere from an hour to four hours in the oven (still wrapped in the paper, of course) on a warm setting. I’ve found that there’s very little difference from a 2 hour rest to a 4 hour rest in terms of juiciness. At the one hour mark it’s fine, but I go at least 2.

For this cook, however, I went completely unwrapped the entire cook. I got the thing on at 10:45pm and pulled it the next morning at 8:07am. 9hrs and 20min total time. The internals were: Point = 202°, Flat = 210°. You honestly do not want the flat to go any higher than that and, in fact, I should have pulled it at 205° or so.

I honestly thought I’d be cooking longer, but I always forget how efficient the Yoder is as compared to a stick burner. Those temp variations are so small! I set my alarm to go off every 90min so that I could wake up and check the pellet hopper and make sure everything was going smoothly. All temptations to peek were resisted! LOL.

I never inject my brisket. Ever. Doing so is criminal. If you cook your brisket right – with a nice choice grade – there’s zero need to inject.
Brisket Bark on a Yoder Smokers YS640

The Rest
After the brisket was pulled, I wrapped it in butcher paper and tossed it into my regular oven on the warm setting. I have no idea the temp…it just says ‘warm.’ This was a very long rest: 7 hours!! I normally don’t rest that long but things got going around the house and we didn’t slice until much later than expected. No worries. As I mentioned earlier, there’s no difference I can ever tell between that 2 hour rest to a 4 hour rest… or a 7 hour rest. I read all this stuff that people insist on at least a 5 hour rest or whatever. I don’t agree. I also never do the whole ‘wrap in towels and rest in a cooler or cambro’ thing. I find dragging out my cooler for storing brisket to be highly annoying and it always needs cleaning so… oven it is!

Now, let’s get down to the heart of this thing: I long ago stopped using foil for my brisket cooks and resting because FOIL IS THE ENEMY. As mentioned above, I usually wrap with butcher paper at the 7 hour mark, but used it here for just the rest. Here’s why: Resting in the butcher paper will absolutely retain your moisture and heat but, even if you overwrap, the meat can still breath inside. Even after becoming saturated with the wonderful juice and oils, it still breathes. Foil never breathes. It simply steams your meat and makes the bark into a soggy mess.

If you haven’t made the switch to butcher paper, give it a try. You used to have to order it from obscure online restaurant supply houses but now Amazon has it for a great price and very fast delivery!
Brisket Resting In Paper

The Result
This was the best brisket I’ve smoked yet. Getting to what the great barbecue writer and blogger Daniel Vaughn calls that ‘sugar cookie’ bark is so rewarding and a blessing!!

That’s not to say there weren’t some niggling problems. The bottom of the brisket was very nearly burned. I mean, just barely shy of that point. Close. Very close. It was a bit crunchy, but thankfully not burned. I should have wrapped at about the 7.5 to 8hr mark. Just looking at the thing I can tell that the last hour is when the crunch was probably formed. Even sticking to my original process of the 7 hour mark would be fine but… this brisket had the best bark I’ve done and that was my mission on this cook.

The flat – even the end of the flat – was moist. The juice was everywhere, in every slice and nugget. Long after the slicing, every remaining piece was juicy. The burnt ends and bulk end of the point were swimming in juice; even the remnants an hour after slicing were still juicy. Love that!
Central TX Brisket on the Yoder YS640 Pellet Cooker

Well, that’s it! Sorry for the long post but I love talking about this stuff! I’ve still got so much to learn, but really enjoyed those posts where folks go into serious detail. They’ve been such a help, and hopefully this post will do the same for someone just starting out. I love my Yoder!!!

Juicy Texas-style brisket cooked on a Yoder Smokers YS640

 

 

6 thoughts on “Central Texas Brisket on the YS640

  1. I should have wrapped at about the 7.5 to 8hr mark. You can put the butcher paper insider the Yoder for 2 hours? Does the paper not get too hot and burn?

    Thanks for the great write up

  2. The paper should be fine in your cooker since you are cooking at a lower heat – remember Fahrenheit 451 is the temp at which books burn…

    To be honest at #TeamYoder HQ, we prefer foil!

    • Not sure what pellets Scott used for this cook but using BBQrs Delight Mesquite pellets or blending some into your usual mix would certainly add a little Hill Country flavor to brisket!

  3. Awesome process I haven’t tried a brisket yet on my yonder been a little tenetive because of the price here in California but you have taken the guess work out of it. Thanks for your help. Greg

  4. I too have a Yoder YS640 but have yet to try a brisket because its just myself, my wife and the cat. And the cat probably wouldn’t help eat a 15# brisket so the only thing I’ve been cooking is chicken, be it wings or halves or quarters. I’m still in the learning process of how to cook on this thing so your post was most helpful but I have a question about the part where you moved the grilling dampner to the center. Wouldn’t that actually concentrate the heat more and burn or cook the brisket faster? When I cook my chicken I make sure the dampner is all the way out so to get a more even smoke and I just assumed you would do the same for a large piece of meat. Any thoughts on this? And thanks ahead of your response.
    Richrt from Texas

Leave a Reply to Greg W Cancel reply

Your email address will not be published. Required fields are marked *